How to Field Strip a Glock 19 Gen 4
Field stripping a Glock 19 Gen 4 is an essential skill for any Glock owner who wants to maintain their firearm. This process allows you to clean, inspect, and lubricate the gun to ensure its optimal performance. In this article, we will guide you through the steps of field stripping a Glock 19 Gen 4 safely and efficiently.
Before You Begin
Before you start the field stripping process, it’s crucial to ensure that the firearm is unloaded and the magazine is removed. Always keep the firearm pointed in a safe direction, and make sure that there are no live rounds in the chamber. Double-check these safety measures before proceeding.
Step 1: Remove the Magazine
1. Hold the magazine release lever on the bottom of the frame with your thumb.
2. Slide the magazine out of the magazine well.
Step 2: Empty the Chamber
1. Point the firearm in a safe direction.
2. Use your fingers to pull the slide back to expose the chamber.
3. Look through the ejection port to ensure the chamber is clear of any rounds.
4. Lower the slide and slide it back into the frame.
Step 3: Lock the Slide Back
1. Pull the slide back to expose the locking block on the frame.
2. Press the slide stop lever to the rear, allowing the slide to move freely.
3. Push the slide back until it stops, fully locking it into place.
Step 4: Remove the Slide
1. Insert the magazine release tool or the slide lock tool into the magazine well.
2. Push the magazine release tool down to unlock the slide.
3. Pull the slide off the frame, keeping it pointed in a safe direction.
Step 5: Remove the Rear Spring and Guide Rod
1. Push the rear spring and guide rod out of the slide from the rear.
2. You may need to use a small flathead screwdriver to assist in removing the spring and guide rod.
Step 6: Remove the Slide Stop and Rear Spring
1. With the slide still off the frame, you can now remove the slide stop.
2. Remove the rear spring from the slide.
Step 7: Inspect and Clean the Gun
Inspect the interior of the slide, frame, and barrel for any signs of wear, dirt, or corrosion. Clean the firearm as needed using the appropriate cleaning tools and solvents.
Step 8: Reassemble the Gun
1. Place the rear spring back into the slide.
2. Install the slide stop.
3. Reinstall the slide stop lever.
4. Reinstall the slide, ensuring that it engages with the slide lock.
5. Push the slide forward until it stops, fully locking it into place.
6. Reinstall the rear spring and guide rod.
7. Install the magazine release tool or slide lock tool into the magazine well and push the slide back to unlock it.
8. Reinstall the magazine and ensure it is properly seated.
Conclusion
Field stripping a Glock 19 Gen 4 is a straightforward process that can help maintain your firearm’s performance. By following these steps, you can safely and efficiently disassemble and reassemble your gun. Always prioritize safety and double-check each step to ensure a successful field stripping experience.
