How to Program a 2013 Ford Explorer Key Fob
The 2013 Ford Explorer is a versatile and reliable vehicle, and one of its key features is the remote key fob. This handy device allows you to lock, unlock, and start your car without the need for a physical key. However, if you have lost your key fob or need to add a new one, programming it can be a bit daunting. In this article, we will guide you through the process of how to program a 2013 Ford Explorer key fob, ensuring that you can enjoy the convenience of remote access to your vehicle.
Before You Begin
Before you start programming your key fob, there are a few things you’ll need to gather:
1. The original key fob or a new one you wish to program.
2. The owner’s manual for your 2013 Ford Explorer, which contains specific instructions for programming the key fob.
3. A set of batteries for the key fob, if needed.
4. A flathead screwdriver, if your key fob requires it.
Step-by-Step Guide to Programming Your 2013 Ford Explorer Key Fob
1.
Turn on the Ignition
– Turn the ignition to the “ON” position without starting the engine. This step initializes the vehicle’s system.
2.
Insert the Key
– Insert the physical key into the ignition and turn it to the “ON” position. Keep it there for about 10 seconds.
3.
Remove the Key
– After 10 seconds, remove the key from the ignition. The vehicle’s security system will now prompt you to program the key fob.
4.
Press the Lock Button
– Within 30 seconds of removing the key, press the lock button on the key fob. You should hear a confirmation chime or see the interior lights flash, indicating that the programming process has started.
5.
Repeat for Additional Key Fobs
– If you have more than one key fob to program, repeat steps 2 through 4 for each additional fob.
6.
Complete the Programming
– After programming all the key fobs, turn the ignition to the “OFF” position. The security system will confirm that the key fobs have been successfully programmed.
7.
Test Your Key Fob
– To ensure that the key fob is working correctly, lock and unlock your vehicle using the key fob. If it operates as expected, you have successfully programmed your 2013 Ford Explorer key fob.
Conclusion
Programming a 2013 Ford Explorer key fob is a straightforward process that can be completed in just a few minutes. By following these simple steps, you can enjoy the convenience of remote access to your vehicle and ensure that you have a backup key fob in case of emergencies. Always refer to your owner’s manual for specific instructions and troubleshooting tips, as the process may vary slightly depending on your vehicle’s model and year.
