How to Change Battery in 2020 Ford Explorer
If you’re a proud owner of a 2020 Ford Explorer and find yourself in need of replacing the vehicle’s battery, you’ve come to the right place. Replacing the battery is a task that can be done by most car owners with some basic tools and a bit of patience. In this article, we’ll guide you through the process of how to change battery in a 2020 Ford Explorer, ensuring that your vehicle is back on the road in no time.
Before You Begin
Before diving into the replacement process, it’s essential to gather all the necessary tools and prepare your workspace. Here’s what you’ll need:
– A new battery that matches the specifications of your 2020 Ford Explorer.
– A socket set, including a 13mm socket and ratchet.
– A jack and jack stands.
– A lug wrench.
– A container to catch any battery acid that may spill.
Step-by-Step Guide to Changing the Battery
1.
Prepare Your Workspace
– Park your 2020 Ford Explorer on a flat, stable surface and engage the parking brake.
– Locate the battery in the engine compartment, typically found on the driver’s side under the hood.
– Place a container underneath the battery to catch any spilled acid.
2.
Remove the Battery Cables
– Open the hood of your Ford Explorer and locate the battery cables, which are usually marked with positive (+) and negative (-) signs.
– Using the socket set, disconnect the negative cable first. This is the cable with the black or brown connector.
– Next, disconnect the positive cable. This cable is usually red and has a positive sign.
3.
Remove the Battery Holders
– Locate the battery holders on each side of the battery. These are usually made of metal and may be held in place by bolts or clips.
– Loosen and remove the bolts or clips to release the battery holders.
4.
Remove the Battery
– Carefully lift the battery out of the engine compartment, taking care not to drop it or cause damage to the battery terminals.
– Place the old battery in the container to catch any spilled acid.
5.
Install the New Battery
– Position the new battery in the engine compartment, ensuring that it’s properly seated in the battery holders.
– Reattach the battery holders by tightening the bolts or clips.
6.
Reconnect the Battery Cables
– Reattach the positive cable first, followed by the negative cable.
– Make sure the cables are securely connected to the battery terminals.
7.
Secure the Battery
– Reinstall the battery holders by tightening the bolts or clips.
– Check that the battery is securely held in place.
8.
Test the Battery
– Start your 2020 Ford Explorer and check for any warning lights or issues.
– If everything seems to be functioning properly, you’ve successfully changed the battery.
Conclusion
Replacing the battery in your 2020 Ford Explorer is a manageable task that can be done with a bit of preparation and the right tools. By following this step-by-step guide, you can ensure that your vehicle is back on the road in no time. Remember to dispose of the old battery properly and always take precautions when handling batteries to avoid injury or damage.
