How to Change Battery in 2020 Ford Explorer Key Fob
Keeping your 2020 Ford Explorer key fob in good working condition is essential for the convenience and security of your vehicle. One of the most common maintenance tasks for key fobs is replacing the battery. In this article, we will guide you through the process of changing the battery in your 2020 Ford Explorer key fob, ensuring that you can continue to use your keyless entry system without any issues.
Before you begin, gather the following materials:
- Replacement battery (CR2032)
- Screwdriver (if necessary)
- Soft cloth or tissue
Step 1: Locate the Battery Compartment
Start by locating the battery compartment on your 2020 Ford Explorer key fob. This is typically found on the back of the fob, near the top. You may need to remove the back cover of the fob to access the battery compartment. Use a soft cloth or tissue to clean the area around the compartment to ensure a good connection when replacing the battery.
Step 2: Remove the Old Battery
Using a small flathead screwdriver, gently pry the battery out of the compartment. Be careful not to scratch the battery or the fob. Once the old battery is removed, set it aside for recycling.
Step 3: Insert the New Battery
Take the new CR2032 battery and insert it into the compartment with the positive (+) side facing up. Ensure that the battery is properly seated and that it makes good contact with the battery contacts.
Step 4: Reassemble the Key Fob
Once the new battery is in place, reassemble the key fob by replacing the back cover and securing it with any screws that may be present. Make sure the cover is tight and that there are no gaps or loose connections.
Step 5: Test the Key Fob
After reassembling the key fob, test it to ensure that the battery change was successful. Press the buttons on the key fob to check if the keyless entry system is functioning correctly. If the key fob is working as expected, you have successfully changed the battery.
By following these simple steps, you can easily change the battery in your 2020 Ford Explorer key fob and keep your vehicle’s keyless entry system in top condition. Remember to replace the battery when it starts to show signs of weakness, such as a slower response from the key fob or a decrease in the range of the keyless entry system.
