How to Change Rear Wiper Blade on Ford Explorer
If you’re a Ford Explorer owner, you may find yourself needing to replace the rear wiper blade at some point. This article will guide you through the process of changing the rear wiper blade on a Ford Explorer, ensuring that your vehicle remains clean and clear of rain and snow.
Materials Needed
Before you begin, gather the following materials:
– Replacement rear wiper blade
– Wiper blade adapter (if necessary)
– Wiper fluid
Step 1: Park Your Ford Explorer
First, park your Ford Explorer on a flat and level surface. Make sure the engine is turned off and the vehicle is in park with the parking brake engaged. This will ensure your safety while working under the vehicle.
Step 2: Remove the Old Wiper Blade
Locate the rear wiper arm on your Ford Explorer. You should see a small pin or clip holding the wiper blade in place. Gently pull the pin or clip to release the blade from the arm.
Step 3: Detach the Wiper Blade from the Arm
With the pin or clip released, gently pull the wiper blade away from the arm. If you have a wiper blade adapter, make sure to remove it before detaching the blade.
Step 4: Install the New Wiper Blade
Hold the new wiper blade by its handle and align it with the wiper arm. Push the blade onto the arm until it clicks into place. If you have a wiper blade adapter, install it on the blade before attaching it to the arm.
Step 5: Reattach the Wiper Arm
Once the new wiper blade is securely attached to the arm, reinsert the pin or clip to hold the blade in place. Make sure it is properly engaged.
Step 6: Apply Wiper Fluid
Fill the reservoir with fresh wiper fluid. If your Ford Explorer has a low fluid warning light, make sure to fill the reservoir to the appropriate level indicated by the gauge.
Step 7: Test the Rear Wiper
Start your Ford Explorer and turn on the rear wiper to ensure that it is working properly. Check that the new wiper blade is moving smoothly and effectively clearing the windshield.
Conclusion
Changing the rear wiper blade on a Ford Explorer is a relatively simple task that can be done in just a few minutes. By following these steps, you can keep your vehicle’s rear windshield clean and clear, ensuring safe driving conditions in inclement weather.
