How to Change Dodge Challenger Key Fob Battery
If you’re a Dodge Challenger owner and have found yourself in a situation where your key fob’s battery is dead, you might be wondering how to change it. Replacing the battery in your Dodge Challenger key fob is a relatively simple task that you can do on your own, saving you the cost of a professional visit. In this article, we’ll guide you through the process step by step, ensuring that you can get back on the road in no time.
What You’ll Need
Before you begin, gather the following items:
– Replacement battery (typically a CR2032 coin cell battery)
– A flathead screwdriver
– A pair of needle-nose pliers (optional)
Step 1: Remove the Key Fob Cap
1. Start by locating the key fob cap, which is usually found on the back of the key fob.
2. Use the flathead screwdriver to gently pry the cap off. Be careful not to apply too much force, as you don’t want to damage the key fob’s internal components.
Step 2: Locate the Battery Compartment
1. Once the cap is removed, you should see the battery compartment. It’s typically a small, flat opening with a metal spring inside.
2. Use the flathead screwdriver to carefully push the spring down and pop the battery out. If the battery is stuck, you may need to use the needle-nose pliers to gently pull it out.
Step 3: Replace the Battery
1. Take the new CR2032 battery and insert it into the battery compartment. Make sure to align the positive (+) side of the battery with the positive symbol on the compartment.
2. If you’re using needle-nose pliers, gently push the battery into place with the pliers.
Step 4: Reassemble the Key Fob
1. Once the new battery is in place, push the battery compartment cover back on and secure it with the flathead screwdriver.
2. Replace the key fob cap and ensure it’s securely in place.
Step 5: Test the Key Fob
1. Hold the key fob close to the ignition or door lock sensor to test if it’s working properly.
2. If the key fob responds as expected, you’ve successfully replaced the battery.
Conclusion
Changing the Dodge Challenger key fob battery is a straightforward process that doesn’t require specialized tools or expertise. By following these simple steps, you can save time and money by doing it yourself. Just remember to keep a spare battery on hand, so you’re never caught without a functioning key fob. Happy driving!
