How to Make a Manipulator Chip in Pocket Mortys
In the world of Pocket Mortys, a manipulator chip is a powerful tool that allows its user to control the minds of others. Whether you’re looking to protect your Morty from being manipulated or want to add an extra layer of fun to your gameplay, creating your own manipulator chip can be an exciting and rewarding project. In this article, we’ll guide you through the process of making a manipulator chip in Pocket Mortys, step by step.
Step 1: Gather the Materials
Before you begin, you’ll need to gather the following materials:
– A small, durable plastic or metal case
– A microcontroller (such as an Arduino or Raspberry Pi)
– A small speaker
– A few wires
– A 9V battery
– A battery holder
– A switch
– Soldering iron and solder
– Wire cutters
– A multimeter
– Glue or tape (optional)
Step 2: Assemble the Components
1. Begin by cutting the necessary lengths of wire for your project.
2. Connect the speaker to the microcontroller using the wires. Make sure to follow the polarity (positive and negative) of the speaker and the microcontroller.
3. Connect the switch to the microcontroller, following the polarity of the switch.
4. Attach the battery holder to the microcontroller, ensuring that the battery can be inserted and removed easily.
5. Solder the wires to the appropriate pins on the microcontroller, ensuring a secure connection.
Step 3: Program the Microcontroller
1. Connect the microcontroller to your computer using a USB cable.
2. Install the necessary software for programming the microcontroller (e.g., Arduino IDE for Arduino).
3. Write a simple program that will control the speaker and switch. You can use the ‘tone’ function to play a specific sound, and the ‘digitalWrite’ function to control the switch.
4. Upload the program to the microcontroller.
Step 4: Test the Manipulator Chip
1. Insert the 9V battery into the battery holder.
2. Power on the microcontroller by pressing the switch.
3. Listen to the sound played by the speaker. You can adjust the tone and duration of the sound by modifying the program.
4. If the manipulator chip is working correctly, you should hear the sound when the switch is pressed.
Step 5: Encase the Manipulator Chip
1. Place the microcontroller, speaker, switch, and battery holder inside the plastic or metal case.
2. Secure the components using glue or tape, ensuring that they are firmly in place.
3. Close the case and secure it with the lid or fasteners.
Congratulations! You have successfully created a manipulator chip in Pocket Mortys. This device can be used to control the minds of others, adding an extra layer of fun to your gameplay. Remember to use this tool responsibly and for entertainment purposes only.
