How to Enlarge Pockets on Jeans
Jeans are a versatile and comfortable piece of clothing that many people wear on a daily basis. However, over time, the pockets on jeans can become too small for your needs, or you may simply want to make them larger for aesthetic reasons. Whether you need more space for your phone, wallet, or other personal items, learning how to enlarge pockets on jeans can be a useful skill. In this article, we will guide you through the process of safely and effectively enlarging the pockets on your jeans.
Materials Needed
Before you begin, gather the following materials:
– Scissors
– Pliers
– Seam ripper
– Thread and needle
– Fabric glue or fabric tape
– Measuring tape
– Iron and ironing board
Step 1: Measure and Mark
Start by measuring the current size of your pocket and determining how much larger you want it to be. Use a measuring tape to measure the length and width of the pocket, and mark the new dimensions on the fabric with a pen or chalk. Make sure to leave enough space for seam allowances.
Step 2: Remove the Pocket
Using a seam ripper, carefully remove the stitching around the pocket. Be sure to keep the stitching in good condition, as you will need it later. Once the pocket is removed, set it aside for now.
Step 3: Cut the Fabric
Using your scissors, cut the fabric along the marked lines. Make sure to leave enough seam allowances to sew the pocket back on. If you are unsure about the amount of seam allowance to leave, a standard width is 1/2 inch (1.27 cm).
Step 4: Add a Seam Allowance
Now, fold the edges of the cut fabric inward by 1/2 inch (1.27 cm) and press them with an iron. This will create a clean edge for sewing.
Step 5: Sew the New Pocket
Using your needle and thread, sew the edges of the new pocket together, leaving a small opening for turning. Be sure to sew the pocket with a sturdy stitch, as it will be carrying heavy items.
Step 6: Turn the Pocket Right Side Out
Turn the pocket right side out through the small opening you left. Use a pencil or chopstick to push out the corners and ensure a smooth finish.
Step 7: Attach the Pocket
Place the new pocket in the correct position on the jeans, aligning it with the original pocket placement. Pin the pocket in place and sew it onto the jeans using a sturdy stitch. Be sure to sew through both layers of the denim for added strength.
Step 8: Trim and Finish
Once the pocket is securely attached, trim any excess thread and remove any pins. If desired, you can use fabric glue or fabric tape to reinforce the edges of the pocket.
Congratulations! You have successfully enlarged the pockets on your jeans. Now you can enjoy more space for your personal items and show off your DIY skills.
