How to Sew a Hoodie Pocket Back on by Hand
Embroidering a hoodie pocket back on by hand can be a challenging yet rewarding task. Whether your hoodie pocket has come loose or you’ve accidentally cut it off, learning how to repair it yourself can save you time and money. In this article, we will guide you through the process of sewing a hoodie pocket back on by hand, step by step.
Materials Needed
Before you begin, gather the following materials:
– Your hoodie
– New pocket material (matching the color and fabric of your hoodie)
– Scissors
– pins
– needle
– thread (matching the color of your hoodie)
– sewing machine (optional)
Step 1: Prepare the Pocket Material
1. Cut out the new pocket material in the desired shape and size. Ensure that the material is slightly larger than the original pocket to allow for seam allowances.
2. Press the edges of the new pocket material with an iron to create a clean edge.
3. If necessary, sew a hem around the edges of the new pocket material to prevent fraying.
Step 2: Mark the Pocket Placement
1. Lay your hoodie flat on a surface with the pocket side facing up.
2. Place the new pocket material on top of the hoodie, aligning it with the original pocket’s position.
3. Use pins to secure the new pocket material in place. Ensure that the edges of the new pocket are aligned with the edges of the hoodie.
Step 3: Sew the Pocket to the Hoodie
1. Starting from the top edge of the new pocket, sew a straight stitch along the edge, using a 1/4-inch seam allowance.
2. Continue sewing around the pocket, ensuring that the needle goes through both the hoodie and the new pocket material.
3. When you reach the bottom edge of the pocket, leave a 1/2-inch opening to turn the pocket right side out.
Step 4: Turn the Pocket Right Side Out
1. Carefully turn the pocket right side out through the 1/2-inch opening.
2. Use a chopstick or a knitting needle to push out the corners of the pocket for a crisp appearance.
Step 5: Close the Opening and Finish the Seam
1. Fold the raw edges of the opening inside the pocket and press them with an iron.
2. Pin the opening closed and sew it shut using a straight stitch.
3. Continue sewing around the pocket, closing the remaining seam.
Step 6: Reinforce the Seam (Optional)
If you want to ensure that the pocket stays in place, you can reinforce the seam by topstitching around the pocket. This step is optional but can give your repair a more polished look.
By following these steps, you can successfully sew a hoodie pocket back on by hand. With a bit of patience and attention to detail, your hoodie will look as good as new!
