How to Clean a Taurus 38 Special Revolver
Cleaning your Taurus 38 Special revolver is an essential part of maintaining its performance and longevity. Regular cleaning not only ensures that your firearm operates smoothly but also prevents rust and corrosion that can damage the gun over time. In this article, we will guide you through the process of cleaning your Taurus 38 Special revolver step by step.
Materials Needed
Before you begin, gather the following materials:
– Gun cleaning kit (with brushes, patches, and solvent)
– Gun oil or lubricant
– Soft cloth or rag
– Safety glasses
– Hearing protection (optional)
Step 1: Safety First
Always prioritize safety when handling firearms. Make sure the revolver is unloaded and clear of any ammunition. Remove the magazine or cylinder, and check the chamber to ensure there are no rounds present. Wear safety glasses and hearing protection to protect yourself from any debris or noise.
Step 2: Field Stripping
Field stripping is the process of disassembling the revolver for cleaning. To field strip your Taurus 38 Special revolver, follow these steps:
1. Remove the cylinder pin from the rear of the cylinder.
2. Slide the cylinder off the frame.
3. Remove the barrel from the frame.
Step 3: Cleaning the Cylinder
Use a brass brush to clean the cylinder and chambers. Apply solvent to the brush and scrub the cylinder and chambers thoroughly. Wipe away the solvent with a patch, and repeat the process until all the solvent and fouling are removed.
Step 4: Cleaning the Barrel
Use a cleaning rod with a brush to clean the barrel. Apply solvent to the brush and run it down the barrel, ensuring that the brush reaches the breech. Wipe away the solvent with a patch, and repeat the process until the barrel is clean.
Step 5: Cleaning the Frame
Use a cotton swab dipped in solvent to clean the frame, focusing on the areas around the cylinder release and the cylinder pin. Wipe away the solvent with a patch, and repeat the process until the frame is clean.
Step 6: Reassembly
Reassemble the revolver by reversing the disassembly steps. Make sure all parts are in good condition and properly aligned before tightening the cylinder pin.
Step 7: Lubrication
Apply a small amount of gun oil or lubricant to the cylinder pin, cylinder release, and any other moving parts. Wipe away any excess oil with a clean patch.
Step 8: Final Inspection
Inspect the revolver to ensure all parts are properly assembled and functioning. Load a few rounds and test-fire the revolver to verify that it operates smoothly.
Conclusion
Cleaning your Taurus 38 Special revolver is a crucial task that should be performed regularly to maintain your firearm’s performance and longevity. By following these steps, you can ensure that your revolver remains in excellent condition for years to come. Always prioritize safety and use the proper tools and techniques when cleaning your firearm.
