How to Make a Double Sided Pocket Square: A Stylish Addition to Your Wardrobe
In the world of fashion, a double-sided pocket square is a versatile and eye-catching accessory that can elevate any outfit. Whether you’re attending a formal event or aiming to add a touch of sophistication to your everyday attire, creating your own double-sided pocket square is a rewarding project that can be done at home. In this article, we will guide you through the process of making a double-sided pocket square, ensuring that you end up with a unique piece that reflects your personal style.
Materials Needed
Before diving into the steps, it’s essential to gather all the necessary materials. Here’s a list of items you’ll need to create your double-sided pocket square:
1. Fabric: Choose two complementary or contrasting fabrics of your choice. The total size of the fabric should be approximately 15 inches by 15 inches.
2. Scissors: A pair of sharp scissors for cutting the fabric.
3. Ruler: A ruler to measure and mark the fabric.
4. Pins: Pins to hold the fabric in place while cutting and sewing.
5. Sewing machine: A sewing machine to sew the edges of the pocket square.
6. Thread: Thread that matches the color of your fabric.
7. Iron: An iron to press the fabric and seams.
8. Measuring tape: A measuring tape to ensure the correct size of the pocket square.
Step-by-Step Guide
1. Cutting the Fabric: Begin by cutting your two chosen fabrics into 15-inch by 15-inch squares. Make sure the edges are straight and even.
2. Marking the Center: Fold each fabric square in half diagonally and then in half again to find the center. Mark the center point with a pin or a fabric pen.
3. Sewing the First Fabric: Place the first fabric square face down on a flat surface. Using a ruler and pins, mark a line 2 inches from the edge on all four sides. This will be the seam allowance. Pin the marked edges together, and then sew along the marked line using a 1/2-inch seam allowance. Repeat this step for the second fabric square.
4. Cutting the Edges: After sewing the edges, trim the excess fabric from the seam allowance, leaving about 1/4 inch. This will prevent the seams from fraying.
5. Pressing the Seams: Use an iron to press the seams open, ensuring that the edges are smooth and flat.
6. Attaching the Second Fabric: With the first fabric still face down, place the second fabric square on top, right sides together. Pin the edges together, ensuring that the marked center points align. Sew along the edges using a 1/2-inch seam allowance, just like before.
7. Cutting the Corners: After sewing the second fabric in place, trim the corners at a diagonal angle to create a sharper point. This will give your pocket square a crisp, finished look.
8. Pressing the Seams Again: Once the corners are trimmed, press the seams open with an iron.
9. Turning the Pocket Square Right Side Out: Use a chopstick or a turning tool to turn the pocket square right side out. Be sure to push out the corners to create a neat appearance.
10. Finishing Touches: Finally, iron the pocket square flat, ensuring that all the seams are smooth and the edges are even.
Congratulations! You have successfully created a double-sided pocket square. Now, you can proudly showcase your handcrafted accessory and add a touch of personal flair to your wardrobe.
