How to Get Sand Out of a Spa
Sand in a spa can be an unexpected and unwanted addition, but it doesn’t have to be a deal-breaker. Whether it’s a small amount of sand that accidentally got in during maintenance or a larger spill, there are several effective methods to remove sand from your spa without causing damage. In this article, we’ll explore the steps you can take to get sand out of a spa and ensure your hot tub is ready for use once again.
1. Drain the Spa
The first step in removing sand from a spa is to drain the water. This allows you to access the sand and remove it without the risk of damaging your spa’s jets or filters. Turn off the power to the spa and locate the drain valve. Open the valve and let the water drain completely. Once the water is gone, you can move on to the next steps.
2. Scoop Out the Sand
With the spa drained, use a bucket or a large spoon to scoop out the sand from the bottom. Be thorough in your search, as sand can sometimes be hidden in corners or between the jets. The more sand you remove, the less likely it is to cause problems later on.
3. Inspect the Filters
While the spa is drained, it’s a good opportunity to inspect the filters. Look for any signs of sand or other debris that may have made its way into the filter system. If you find any, gently brush the sand off with a soft brush or vacuum the filter with a wet/dry vacuum. Be sure to rinse the filters thoroughly before placing them back in the spa.
4. Clean the Spa’s Surface
After removing the sand from the bottom of the spa, it’s important to clean the surface as well. Use a non-abrasive cleaner designed for spa surfaces to wipe down the interior. This will help prevent any sand particles from getting trapped in the spa’s finish and causing scratches or damage.
5. Refill and Test
Once the spa is clean and the filters are replaced, refill the spa with fresh water. Make sure the water level is at the proper level before turning on the power. Test the water’s chemical balance and adjust as needed to ensure a safe and comfortable environment for bathers.
6. Prevent Future Incidents
To prevent future incidents of sand in your spa, consider the following tips:
– Keep a close eye on your spa during maintenance or cleaning to ensure no debris is accidentally introduced.
– Use a fine-mesh filter bag during maintenance to catch any sand or debris before it gets into the spa.
– Regularly inspect the spa’s drain valve and ensure it’s functioning properly.
By following these steps, you can effectively remove sand from your spa and restore it to its original condition. Remember to take preventive measures to avoid future incidents and keep your spa in pristine condition.
