How to Replace Velcro on a Sander
If you own a sander, you know how essential the velcro strip is for securing the sandpaper during use. Over time, the velcro strip can wear out or become damaged, which can affect the performance of your sander. Replacing the velcro strip is a simple and cost-effective solution to keep your sander in top condition. In this article, we will guide you through the process of how to replace velcro on a sander.
Materials Needed:
Before you begin, gather the following materials:
– New velcro strip (make sure it is the same size as the old one)
– Scissors
– Optional: sandpaper (if the old sandpaper is still in good condition)
Step 1: Preparation
1. Unplug the sander and allow it to cool down if it was recently in use.
2. Remove the sandpaper from the sander, if present.
3. Locate the velcro strip on the sander. It is typically found on the sanding pad or the sanding base.
Step 2: Removing the Old Velcro
1. Carefully cut the old velcro strip away from the sander using scissors. Be sure to cut as close to the sander as possible to avoid damaging the surface.
2. If the velcro is stuck or difficult to remove, you can use a heat gun or a hairdryer to soften the adhesive. Be cautious when using heat to avoid damaging the sander.
Step 3: Applying the New Velcro
1. Take the new velcro strip and align it with the old velcro strip’s position.
2. Press the new velcro strip firmly onto the sander’s surface to ensure a secure bond. If the velcro has an adhesive back, remove the protective film and apply it directly to the sander.
3. Make sure the new velcro strip is smooth and free of wrinkles.
Step 4: Reinstalling the Sandpaper
1. Place the sandpaper on the new velcro strip, ensuring it is centered and aligned.
2. Press the sandpaper firmly onto the velcro strip to create a strong bond.
Step 5: Testing the Sander
1. Reconnect the sander to the power source and test it to ensure the new velcro strip is working correctly.
2. If the sander operates smoothly and the sandpaper stays in place, you have successfully replaced the velcro strip.
By following these simple steps, you can easily replace the velcro on your sander and keep it in top condition. Regular maintenance, such as replacing the velcro strip when necessary, will help extend the life of your sander and ensure optimal performance.
